PPF Turbo forum

Some new pictures

The new Accufab throttle body direkt from the states:
















With the 89mm tube is not so many space compare the 76mm tube , I think we built a new Engine mount, for more space.

Hi,
so, after a few day some new parts are ready. The Intake manifold is welded. There are only some parts who have to find the right place on the surface, like the mounting for the fuel rail and temperature sensor.

And after chosen Megasquirt, then ViPec then Link we are now taking, and that´s for sure I hope, the MME ECU481 which is developed and built in Germany. The most powerful VW Golf VR6- and R32-Turbos are using this engine managment, so let´s see what´s happen.

http://www.youtube.com/watch?v=Unpju7ia7wU







Also the thermostat housing is done.











The third time builded Turbo to intercooler is done =)



Oil drain

Hi,

Will you be able to get the car through the TUeV with that exhaust?

@ M3GT111

should work, yes. But that´s a kind of legal limbo =P

god woork,, saad that it is an m30 anda not an s50 or s54a.

Hello,

so there are some changes to do for the new engine managment, like a twin airflow sensor, and a 18mm fuel flow line.

Really nice car.

@Mikael c

thank´s

Some new parts











and I have to built some tools, like this, to roll a bead on the pipes



And the result =) but I have to upgrade this a bit

Last friday the postman delivered the MMe ECU 481 =)
Also from MMe comes the new fuelab pump, the Fuelab filter, Pressure sensor, 2 type-k sensor for Exhausgas and Compressed gas and MAP sensor. The sensors are from bosch.

The v2 of the fuel flow line mounts is done, because the old one´s lift the pipes to close to the underbody.

That is insane, supernice quality on everything. Big thumbs up!

/Erik

Thank´s Erik, nice Opel that you are building, I´m a follower of it since a few years =)

Yesterday I was attend by milling the rest of our Fuel flow line mount´s and those for another projekt. Perfekt work from Sebastian, thank´s for that and the pictures

Hi
after a few weeks of building new parts, a small update



Fuel rail mounting









The 4bar MAP Sensor from Bosch





ready for hold the hose strong



Sensor for water tem and bleeding valve







180°fitting for connecting the filter and the Pump











all together and on the right place =D fit´s perfectly





the new 18mm (15mm inner diameter) - dash-10 intake line





the 210 Diff

Very very nice

Very nice jobb

Frode G

German precision at its best, maybe lederhosen and gay porn i´snt so bad afterall

Seriously, great work, but please, work faster, we want more

This is sick!

Awesome work will be check in this tread everyday.

Is the MMe ECU 481 any good? price?
Nice project btw