I checked that carbotech pads are available to my calipers and those are also a lot cheaper than Ferodos..BMW E30 Street/TimeAttack (DTM style control arms)
Moderators: purepfcom, Pimplaren, Storås, Bmwandreas, Nisse Järnet, pelko, Bäckis
Re: BMW E30 Street/TimeAttack
Okay thanks for the advice! I checked that carbotech pads are available to my calipers and those are also a lot cheaper than Ferodos..
I checked that carbotech pads are available to my calipers and those are also a lot cheaper than Ferodos..FOLLOW US ON FACEBOOK OR INSTAGRAM:
https://www.facebook.com/magnusracingteam" onclick="window.open(this.href);return false;
https://instagram.com/miugemrt" onclick="window.open(this.href);return false;
https://www.facebook.com/magnusracingteam" onclick="window.open(this.href);return false;
https://instagram.com/miugemrt" onclick="window.open(this.href);return false;
Re: BMW E30 Street/TimeAttack
Recently I made a place for the IC radiator, that was pretty much the only place because I didn't want to stuff anything extra to the front. Water tank and pump will be placed to the trunk also.
FOLLOW US ON FACEBOOK OR INSTAGRAM:
https://www.facebook.com/magnusracingteam" onclick="window.open(this.href);return false;
https://instagram.com/miugemrt" onclick="window.open(this.href);return false;
https://www.facebook.com/magnusracingteam" onclick="window.open(this.href);return false;
https://instagram.com/miugemrt" onclick="window.open(this.href);return false;
Re: BMW E30 Street/TimeAttack
Fuel tank is now isolated from the cabin, I wasn't really satisfied with the previous version but this turned out better
Horizontal tubes support rear wing and vertical ones sway bar fastening points:
Like our page, it motivates us to work hard! Thank You!
https://www.facebook.com/magnusracingteam" onclick="window.open(this.href);return false;
Horizontal tubes support rear wing and vertical ones sway bar fastening points:
Like our page, it motivates us to work hard! Thank You!
https://www.facebook.com/magnusracingteam" onclick="window.open(this.href);return false;
FOLLOW US ON FACEBOOK OR INSTAGRAM:
https://www.facebook.com/magnusracingteam" onclick="window.open(this.href);return false;
https://instagram.com/miugemrt" onclick="window.open(this.href);return false;
https://www.facebook.com/magnusracingteam" onclick="window.open(this.href);return false;
https://instagram.com/miugemrt" onclick="window.open(this.href);return false;
Re: BMW E30 Street/TimeAttack
Looks like a Mustang!
FOLLOW US ON FACEBOOK OR INSTAGRAM:
https://www.facebook.com/magnusracingteam" onclick="window.open(this.href);return false;
https://instagram.com/miugemrt" onclick="window.open(this.href);return false;
https://www.facebook.com/magnusracingteam" onclick="window.open(this.href);return false;
https://instagram.com/miugemrt" onclick="window.open(this.href);return false;
Re: BMW E30 Street/TimeAttack
Really nice work!
Love the metalfab!
Love the metalfab!
M50B28 Vanos, 1.7bar, 572whp/680nm
11.10, 194km/h, 1.6 60fot - 420whp/470nm
10.71, 210km/h, 1.49 60fot - 572whp/680nm
11.10, 194km/h, 1.6 60fot - 420whp/470nm
10.71, 210km/h, 1.49 60fot - 572whp/680nm
Re: BMW E30 Street/TimeAttack
Thank you Erik!
Today I got my single wiper conversion work, it's pretty compact package compared to orginal system:
Then I spent few minutes to sketch dashboard, next I'll make a plywood model:
Today I got my single wiper conversion work, it's pretty compact package compared to orginal system:
Then I spent few minutes to sketch dashboard, next I'll make a plywood model:
FOLLOW US ON FACEBOOK OR INSTAGRAM:
https://www.facebook.com/magnusracingteam" onclick="window.open(this.href);return false;
https://instagram.com/miugemrt" onclick="window.open(this.href);return false;
https://www.facebook.com/magnusracingteam" onclick="window.open(this.href);return false;
https://instagram.com/miugemrt" onclick="window.open(this.href);return false;
Re: BMW E30 Street/TimeAttack
Here's air intake for cabin heater, I'm going to use an universal heater unit. Water should run to direction of the blue arrow and red arrow shows path for air:
IC is also now mounted, heater will be bolted on top of it:
Wood workshop! Plywood model almost done, today I must check if the gear stick has enough room, you can't remember everything at once...
IC is also now mounted, heater will be bolted on top of it:
Wood workshop! Plywood model almost done, today I must check if the gear stick has enough room, you can't remember everything at once...
FOLLOW US ON FACEBOOK OR INSTAGRAM:
https://www.facebook.com/magnusracingteam" onclick="window.open(this.href);return false;
https://instagram.com/miugemrt" onclick="window.open(this.href);return false;
https://www.facebook.com/magnusracingteam" onclick="window.open(this.href);return false;
https://instagram.com/miugemrt" onclick="window.open(this.href);return false;
Re: BMW E30 Street/TimeAttack
Yesterday chassis had a quick wash with water and in some parts we used sand:
FOLLOW US ON FACEBOOK OR INSTAGRAM:
https://www.facebook.com/magnusracingteam" onclick="window.open(this.href);return false;
https://instagram.com/miugemrt" onclick="window.open(this.href);return false;
https://www.facebook.com/magnusracingteam" onclick="window.open(this.href);return false;
https://instagram.com/miugemrt" onclick="window.open(this.href);return false;
Re: BMW E30 Street/TimeAttack
No major progress with the car this year, yet, just completed some unfinished welds and made necessary reinforcements for the roll cage:
Our gas turbine bike has taken some time again as we are taking it to a Finnish bike show in the end of the month, few updates and polishing:
Our gas turbine bike has taken some time again as we are taking it to a Finnish bike show in the end of the month, few updates and polishing:
FOLLOW US ON FACEBOOK OR INSTAGRAM:
https://www.facebook.com/magnusracingteam" onclick="window.open(this.href);return false;
https://instagram.com/miugemrt" onclick="window.open(this.href);return false;
https://www.facebook.com/magnusracingteam" onclick="window.open(this.href);return false;
https://instagram.com/miugemrt" onclick="window.open(this.href);return false;
Re: BMW E30 Street/TimeAttack
Finally we got the moped ready for the show:
http://i187.photobucket.com/albums/x281 ... 07b716.jpg
http://i187.photobucket.com/albums/x281 ... ef1315.jpg
..so again I had time for the car. Firstly I did some cutting to complete few welds, but also you'll see air duct for the IC radiator and rear brakes, as well as body needs to be widen couple of centimeters:
http://i187.photobucket.com/albums/x281 ... 07b716.jpg
http://i187.photobucket.com/albums/x281 ... ef1315.jpg
..so again I had time for the car. Firstly I did some cutting to complete few welds, but also you'll see air duct for the IC radiator and rear brakes, as well as body needs to be widen couple of centimeters:
FOLLOW US ON FACEBOOK OR INSTAGRAM:
https://www.facebook.com/magnusracingteam" onclick="window.open(this.href);return false;
https://instagram.com/miugemrt" onclick="window.open(this.href);return false;
https://www.facebook.com/magnusracingteam" onclick="window.open(this.href);return false;
https://instagram.com/miugemrt" onclick="window.open(this.href);return false;
-
Nisse Järnet
- Posts: 6624
- Joined: 26 Nov 2005, 11:58
- Location: Stockholm norrort
Re: BMW E30 Street/TimeAttack
Cool!!
Audi S5 B8 4.0t
E30 325ix M50 turbo 840awhp 7 speed DCT.
M50 764whp @ 1.7 bar.
M20 675whp @ 2.2 bar.
E30 325ix M50 turbo 840awhp 7 speed DCT.
M50 764whp @ 1.7 bar.
M20 675whp @ 2.2 bar.
Re: BMW E30 Street/TimeAttack
Thanks Nisse!
Cut, create, copy, paste.. That's how a sheetmetal version of the widebody is done. Shy version of the Group5 cars..
Still a lot to do.
Cut, create, copy, paste.. That's how a sheetmetal version of the widebody is done. Shy version of the Group5 cars..
Still a lot to do.
FOLLOW US ON FACEBOOK OR INSTAGRAM:
https://www.facebook.com/magnusracingteam" onclick="window.open(this.href);return false;
https://instagram.com/miugemrt" onclick="window.open(this.href);return false;
https://www.facebook.com/magnusracingteam" onclick="window.open(this.href);return false;
https://instagram.com/miugemrt" onclick="window.open(this.href);return false;
-
Nisse Järnet
- Posts: 6624
- Joined: 26 Nov 2005, 11:58
- Location: Stockholm norrort
Re: BMW E30 Street/TimeAttack
Thats a new one for me on a E30, nice!
Audi S5 B8 4.0t
E30 325ix M50 turbo 840awhp 7 speed DCT.
M50 764whp @ 1.7 bar.
M20 675whp @ 2.2 bar.
E30 325ix M50 turbo 840awhp 7 speed DCT.
M50 764whp @ 1.7 bar.
M20 675whp @ 2.2 bar.
Re: BMW E30 Street/TimeAttack
This this is going to be so freaking bad ass! Cant wait to see it done
Keep up the good work!
Keep up the good work!
Bmw e30 M5 Turbo
http://www.garaget.org/?car=213993" onclick="window.open(this.href);return false;
http://www.garaget.org/?car=213993" onclick="window.open(this.href);return false;
Re: BMW E30 Street/TimeAttack
Thanks guys! Haven't seen similar bodywork in E30 either, got to try something different
One side ready, one to do. Air duct for the radiator with 180mm hose connection and 76mm for the brakes. Not the easiest thing to do out of sheet metal, but I'm pretty happy with the result
One side ready, one to do. Air duct for the radiator with 180mm hose connection and 76mm for the brakes. Not the easiest thing to do out of sheet metal, but I'm pretty happy with the result
FOLLOW US ON FACEBOOK OR INSTAGRAM:
https://www.facebook.com/magnusracingteam" onclick="window.open(this.href);return false;
https://instagram.com/miugemrt" onclick="window.open(this.href);return false;
https://www.facebook.com/magnusracingteam" onclick="window.open(this.href);return false;
https://instagram.com/miugemrt" onclick="window.open(this.href);return false;
Re: BMW E30 Street/TimeAttack
Artwork =)
M50B28 Vanos, 1.7bar, 572whp/680nm
11.10, 194km/h, 1.6 60fot - 420whp/470nm
10.71, 210km/h, 1.49 60fot - 572whp/680nm
11.10, 194km/h, 1.6 60fot - 420whp/470nm
10.71, 210km/h, 1.49 60fot - 572whp/680nm
