E30 MtechII S14 turbo. 430HP / 520NM @ 0.8 bar

Tim Maatman · Post by **Tim Maatman** » 09 Jan 2010, 12:12

Hello I'am Tim Maatman from holland ! and i'am new member here ,
i look already 2/3 years on PPF Forum !

But now i also make a topic from my car(s)

I have start my project in a BMW E30 touring

thats my first beemer from my 18year

but i'am not happy whit the body and the paintjob ,
a friend of my sold his E30 Mtech II chassis ! and i start to rebild al from the touring to the coupe ! take a look @ the pics !

Material list

:

S14B23
JE Pistions
SC6262sp ar.83 T3 turbo
JAZ Fuel cell 12 Gallon
2x 044 pump
Nuke Y splitter
Nuke Fuel Filter
NUKE (PPF) Fuelrail
Nuke Regulator
Nuke Vacuum station
bosch 1680cc Injectors
PPF Wastegate 60mm ? (not ordered)
PPF 50mm BOV (not ordered)
618 clutch (PPF)
4 ore 6 puck centerplate ( PPF)
Rear Camber set from PPF
325 sperr diff whit new plates and Z3m coolerback plate
KW Variant II coilover set.
Getrag 280 M5 5 gang gearbox
and al powerflex rubbers .

This pics are from the Touring whit my old GT3076 turbo
http://s218.photobucket.com/albums/cc19 ... ?start=all

this are pics also from the old Touring now comes everything new in the Coupe
http://s218.photobucket.com/albums/cc19 ... ?start=all

http://s218.photobucket.com/albums/cc19 ... tuk%20S14/

Tim Maatman · Post by **Tim Maatman** » 09 Jan 2010, 12:37

Here some pics of the new project !

Make new floor in for fuel system

make the Camber plates in

S14 and RB26 waiting for installing

test of the engine will fit

now waiting on new turbo off it will fit on the GT3076 hand made manifold

when it fit's i weld it done

KNACKAN · Post by **KNACKAN** » 09 Jan 2010, 12:42

Nice car!

Johan99 · Post by **Johan99** » 09 Jan 2010, 14:30

Really nice!

Jørg1e30 · Post by **Jørg1e30** » 09 Jan 2010, 18:30

Nice. Is it daytona violet?

Tim Maatman · Post by **Tim Maatman** » 09 Jan 2010, 19:09

Yes it is daytona Violet !

some new pics from today

my brakes whit porsche (brembo) caliper

Some fun haha

new license plate haha

Jørg1e30 · Post by **Jørg1e30** » 09 Jan 2010, 19:29

Daytona is are very nice color. i have the same color on my e30 m3.

http://www.pure-pf.com/phpBB2/viewtopic.php?t=39571

Micke johansson · Post by **Micke johansson** » 09 Jan 2010, 19:56

Hello my friend , finaly you took your time to set up a thread

Tim Maatman · Post by **Tim Maatman** » 09 Jan 2010, 20:10

Jørg1e30 wrote:Daytona is are very nice color. i have the same color on my e30 m3.

http://www.pure-pf.com/phpBB2/viewtopic.php?t=39571

yes i know your topic i have seen it nice nice

Tim Maatman · Post by **Tim Maatman** » 09 Jan 2010, 20:11

Micke johansson wrote:Hello my friend , finaly you took your time to set up a thread

yes yes finaly haha

i have about 14 people from PPF on Msn

Strandholm · Post by **Strandholm** » 09 Jan 2010, 20:27

looks really nice :]

Tim Maatman · Post by **Tim Maatman** » 09 Jan 2010, 20:40

btw the Management is from "Van Kronenburg motorsport"
http://www.vankronenburg.nl/

i have now the MP25 ECU

http://kms.vankronenburg.nl/products_ecu.html

and the KMS UEGO Display set , KMS Map sensor 400 kPa,
KMS Idle control kit, KMS Discoil (4 cylinder) with ignition driver

http://kms.vankronenburg.nl/products_add.html

and some Nuke stuff

fulingbusen · Post by **fulingbusen** » 10 Jan 2010, 01:26

I´m waiting for Bäckis´s input on those wheels

Tim Maatman · Post by **Tim Maatman** » 10 Jan 2010, 10:44

fulingbusen wrote:I´m waiting for Bäckis´s input on those wheels

Bäckis oh tell me

jeenz · Post by **jeenz** » 11 Jan 2010, 00:32

looks awesome dude

Tim Maatman · Post by **Tim Maatman** » 14 Jan 2010, 20:30

oke today make the bracket for the fuel tank that is arived yesterday

and begin on the new inlet manifold

Konny · Post by **Konny** » 15 Jan 2010, 17:11

De var på tiden att du skaffade en pojekt tråd!

Dock har jag ju fått sett alla fina bilder förut när du har skickat dom på msn men den är så fin att man kan se lite till på dom.
Grymt fin bil!! Lycka till i fortsättningen