Opel kadett C
Posted: 09 Nov 2006, 21:41
Hello
Info about my projekt:
Chassis:
- 1975 kadett c
- rollcage
Suspension
- Home made front wishbones(crmo) with uniball joints
- four link, also home made arms(crmo)
- Dana 30 rear axle from 240 volvo with LSD
- coilovers all around(öhlins, not bought yet)
- watt-link
Brakes
- Front: Alcon 4-pot caliber(from groub-b audi?) and 325mm Alcon discs, ferodo pads
- Rear: Volvo original disc brakes with ferodo pads
- Tilton pedalbox
Interior
- Stack dash
- Sparco race seats
- electronic power steering from Toyota Avensis
Transmission
- E36 M3 6-speed
Motor(have no parts except crankshaft and some block)
- M20B27 med diesel crank
plan is to build 600+hp M20 engine but I will consentrate to motor when other car is nearly ready.
PICTURES
Please, write english, my swedesh is very poor
Info about my projekt:
Chassis:
- 1975 kadett c
- rollcage
Suspension
- Home made front wishbones(crmo) with uniball joints
- four link, also home made arms(crmo)
- Dana 30 rear axle from 240 volvo with LSD
- coilovers all around(öhlins, not bought yet)
- watt-link
Brakes
- Front: Alcon 4-pot caliber(from groub-b audi?) and 325mm Alcon discs, ferodo pads
- Rear: Volvo original disc brakes with ferodo pads
- Tilton pedalbox
Interior
- Stack dash
- Sparco race seats
- electronic power steering from Toyota Avensis
Transmission
- E36 M3 6-speed
Motor(have no parts except crankshaft and some block)
- M20B27 med diesel crank
plan is to build 600+hp M20 engine but I will consentrate to motor when other car is nearly ready.
PICTURES
Please, write english, my swedesh is very poor
