PPF Turbo forum

My Swedish is not so good so the talk will be in english, the technical specs will be in Swedish

I want to build a turbo charged e28, for drifting and racing.

Half a year ago a bought an 1985 e28 m535
The car was salvaged and i bought the chassis

Here the pics of the car from the last owner







Because parts are expensive and wanted he sold the car in pieces.
He took out the motor,gearbox,cardan axle, Speedometer.
inredning,bilstein springs and shocks, wheels, mtechnik bumper and wings. Lights and so much more

I didnt care for the engine because i wanted a m30b35 from an e34.
Thats a much better engine for turbocharging then the m30b34.

As you see on the first pics, it doesnt seem to rusty.

Here are the next series.











So it was quite crispy
I bought a svets and i welded some metal into it.

I bought a mtech bumperkit.
17"Rondell style 58
M535 speedometer.
E31 alu brembo bremsbacken fram
koni yellow front shocks.
some used Bilstein m5 rear shocks with mtech springs
Powerflex black bushings fram and bak.

And not to forget the m30b35 with getrag 260 overdrive gearbox, harness and motronic
Because of the mismatching engine mounts i hemmabygt my own enginemounts, as you can see i used the four boults on the engine.





I installed the engine and wired it to check everything




Here some more pictures for the rest of the vehicle.








This week i will get the welding ready, i already took off the rear axle for cleaning and changing the bushings. It improved the welding on the rear beams also

I will make some new pics tomorrow.