Någon som vill ha special skottsäker bakvagn E30? Kolla här!

[Thörn]

är det skillnad på bäramarna i e30 med de som har lilla och stora lagret 323i vs 325i i yttre medbringaren?

[Jørg1e30]

Ja. det er mindre lager i 323. Så du må ha 325 eller m3 skal det passe rakt av.

[Jasu]

I have read this topic many times but I do not fully understand Swedish, so I need your help.

Can someone tell me what parts do I need and what needs to be changed/modify, if I want to use: typ210 3.07 diff, PPF's drive shaft kit and the original brakes (including handbrake)?

Mvh. Jani

[Bäckis]

You need the hubs and CV joints that can be taken from a variety of models, such as:

E34: 530/535/540/M5
E28: 535
E32: 730/735

[Jasu]

You need the hubs and CV joints that can be taken from a variety of models, such as:

E34: 530/535/540/M5
E28: 535
E32: 730/735

Ok, but that kit includes CV joints? So it is not possible to keep 4x100 lug?

[Bäckis]

You buy shafts with joints from any of the cars listed, they fit the new axles.

To use 4x100 you need to modify the outer hub by welding one hole since the bolt patterns collide.

[Jasu]

You buy shafts with joints from any of the cars listed, they fit the new axles.

To use 4x100 you need to modify the outer hub by welding one hole since the bolt patterns collide.

Ok, so 4x100 pattern is ruled out. What bearing should be used? And is there any brake system what is bolt-on?

[Jasu]

Is this kind of spring ok, or should the pin in any case be transferred?

[bmwe30335]

det tråkiga är att det finns ju inte så mycket 535 e28 diffar:(

[Bäckis]

Går lika lätt eller lättare att montera en E34 diff. Den kan man montera lite längre fram ochs lippa kapa i balken, så jag föredrar den.

[Jasu]

You need the hubs and CV joints that can be taken from a variety of models, such as:

E34: 530/535/540/M5
E28: 535
E32: 730/735

Ok, it seems that side shaft (hub) is same in many models. But drive flange has different numbers -> for example, E28 535i number is 33 41 1 129 859 and E34 530/535/540/M5 has number 33 41 1 131 063. Can someone tell what is the difference between those?

[Krillian]

You need the hubs and CV joints that can be taken from a variety of models, such as:

E34: 530/535/540/M5
E28: 535
E32: 730/735

Ok, it seems that side shaft (hub) is same in many models. But drive flange has different numbers -> for example, E28 535i number is 33 41 1 129 859 and E34 530/535/540/M5 has number 33 41 1 131 063. Can someone tell what is the difference between those?

I know that one of them are "solid" so you can for exampel drill dubble bolt pattern 5x120/4x100..

[Krillian]

it seams to be the "m5/735-750" that is solid..

[m_ellisson]

Om man ska köra e34 diff, hur gör man då med kardanen? Är ju en annan rund medbringare!

[Silverboy]

M3 3.0 +zf

[Jasu]

Thanks for the information Krillian.
Is there any possibility to get abs brakes work?

[Per Eriksson]

When I mounted the big hubs on my E30 I took the abs rings from the old hubs and fitted them on the new ones, both front and rear.
Easy if you have a lathe.

Then a couple of months later I removed the abs unit altogheter.......