Bild på E30 med PPF 600X300X75 intercooler monterad.

Anders Elenius · Post by **Anders Elenius** » 01 May 2010, 12:36

bilder på E30 med intercooler monterad sökes...

kimmit · Post by **kimmit** » 01 May 2010, 13:11

http://kimmitsports.piczo.com/prosjekt2 ... var=000044

Anders Elenius · Post by **Anders Elenius** » 26 May 2010, 16:34

Tack för bilden, har monterat min nu... passade bra på E30.

kakiiis · Post by **kakiiis** » 21 Jun 2010, 13:39

Du har inte nån bild när din är monterad??

beemer · Post by **beemer** » 21 Jun 2010, 16:57

Here's one photo:

Silverboy · Post by **Silverboy** » 21 Jun 2010, 21:04

is that really a 600x300x75?

beemer · Post by **beemer** » 21 Jun 2010, 21:58

Silverboy wrote:is that really a 600x300x75?

Yes, it is. You do have to modify frame rail ends by ~1,5cm per side to fit it like that. Also headlight frames need to be modified little.

This option gives you completely stock-look:

Silverboy · Post by **Silverboy** » 21 Jun 2010, 22:10

beemer wrote:
Yes, it is. You do have to modify frame rail ends by ~1,5cm per side to fit it like that. Also headlight frames need to be modified little.

Ah, OK, didn't see the frame modifications. I went for the 500x300x75 version, as my measurements showed that a 600mm wouldn't fit, so now I started wondering if I was all wrong

The good thing about mounting it like that is that you can keep the airducts for the brakes.. the bad thing is that the main flow passes through the IC where it gets the least cold air..