1K refers to me. (might be that not all custom parts are listed since there is a lot to list!! Have to go thru this list when at the garage and can see the car so I remember all):Engine M20B25 based:
325i cylinder head,bottom end, stock valves, bored to 84,5mm
Wiseco forged pistons (About 8.5:1)
Eagle H-profil rods
2.7TD Crank
Red metal race bearings, crank+rods
Athena fire ring head gasket
12.9 cylinder head bolts
Dbilas Camshaft
Head cleaned/deburred
1K cam spring shims
Supercharger Eaton m90, ported by 1K (Under the intake)
Turbo Holset HX55
KKD- exhaust manifold
Big 3" Intercooler + 3" piping 1K
50mm billet 1K motorsports bypass/BOV
60mm Waste Gate (electronically controlled MAC 4-way)
1K Motorsport custom turbo/SC exchange valve, steel
ITG air filter BIG
All billet water/oil hoses partly from stainless etc.
A lot of billet parts!!
custom TB
New 535 e34 radiator
Oil filter relocation kit
325i Oil cooler
Custom 36mm carbon fibre toothed belt drive for the eaton SC, Gates Polychain GT/1K motorsports, (nice sound)
4" downpipe/exhaust up to under the rear seats+3" double exhaust system from there on (hidden sleeper system, outlets from the sides/under the car before the rear tires, can't see the outlets, planning to get flame throwers)
MB cooling expansion tank
etc.
Electronics:
Knocklite (warning for knock+signal to ecu)
MAXXEcu V9 +CAN Input module
Sony xperia Z1 5" whiteglass for showing data and datalogging ECU, also for music,MP3,video..
LS2 Truck ignition coils (x6, straight ignition), 1K laser cut stainless coil rack,
A lot of measurement points+sensors for datalogging
4bars MAP sensor, MAC 4-way boost valve etc etc.
E85 fueled with multichart functionality
Battery in the trunk
Spall electronic fan, large/thin
etc.
Sounds:
Pioneer CD/MP3, alpine, JBL, Herz (Herz OEM 90#s door speaker system, 2-way, alpine graphic 90#s EQualizer etc.)
E85 Fuel system:
1200cc Bosch injectors (E85 combatible)
3x walbro 255lph
Catch tank/swirlpot
Jazz 60L race tank fitted in the trunk
Aeromotive pressure regulator
etc.
Powertrain/brakes/steering:
M10 M3 E30 lightened steel flywheel
Sachs 618 pressure plate
PPF 6-pucks sintered disk
260 getrag with special red line oil mix
Short shift 1K "kit"
Big hardy+TD driveshaft
typ188 3.15 75% LSD custom differential (4 friction disk pairs)
E36 faster steering rack (3.2 lock to lock)
Custom powersteering tank
750i master brake cylinder 25.4mm
312mmx28mm audi brake disks front, Saab aero turbo calibers with adapters, rear oem style 325i (Hydraulic brake balance calculated, thats why I chose SAAB Calibers)
ABS- unit moved down to allow room for the Air filter/boost pipes etc.
Suspension(Road/sport style):
Front strut brace/bar 1K (car colour)
E30 M3/M-technic Bilstein shocks
E30 M3/325i cabrio stabilizer/sway bars (f 21mm/r 14,5mm)
H&R 40mm springs
E30 M3 offset wishbone front rear bushings (powerflex)
Negative correction camber top plates, front (BMW e30 OEM)
Powerflex polyurethane front/back bushings
(I have caster/camber adjustement plates for the rear axle readily waiting. Will install them some day if I brake the driveshafts first or something so I need to work with the axles anyhow. But not now.)
Interior:
Stock very good for age/reconditioned almost original condition, all black leather interior. Original Recaro seats, black vinyl panels etc. (Car was driven 160tkm when I bought it, since then only about 30tkm more driven)
Aluminium knob, door knobs, chrome door opener frame, AC schnitzer pedal set, original grey mats (Also the main mat is same colour grey)
Check lights etc stock stuff working
M-Tech 1 steering wheel
Exterior:
AZURITE BLACK!!! M-individual colour!
Lightly green tinted original glass (Looks good, very faintly tinned and looks almost blue when installed, originally car was dark green metallic)
Soft Top in good condition,no holes etc. also rear glass/plastic in good condition.
Custom made 1K side skirts (cutted out E39 steel skirts and made them fit)
M-technic 2 front and rear bumbers(Glassfibre-done locally. Very good quality and fitted them 2 weeks to get perfect fit, 2-3mm all around), Front has polished aluminium splitter option.
"Hella" black edition front lights +Xenon 6000K kit for drive lights
Startec rear lights, original!!!!
Grey/clear black blinkers side/front
M-tech2 fog lights (Not yet implemented, might install..some available space problems, heh. If not installed I will put black aluminium screens or just glass part on the holes)
Painted original electric mirrors (Did not want M3 modern style)
Black "shadowline" trim, chrome around top part
Zender star 17" ET25 7,5 rims!!!! Original!! Polished. Also I have 2 pieces of Zender star 15" rims for M/T slicks waiting (Not polished yet, have seen better days so off the record)
225/40 tires?? (Have to have some fuses so I don't blow up the powertrain components before getting custom half shafts/drive shafts on the car)
All rust welded from body, custom rear inner fender on tank fill side etc. NO RUST!! Complitely gone thru the body!
Old story:
<Hallo!
<Here is my project..hope you don´t mind my english
<Hoppas vi är alt klar
<http://www.btcf.fi/forum/showthread.php?p=341383#post341383
<Latest improvement:
<http://www.btcf.fi/forum/showthread.php?t=35409&page=24&pp=10
<Look bottom of the page..
<Some pictures:
<http://palkki.oulu.fi/%7Esamila/ppf/
<See you at Gatebil or Kalajoki 2006
<OBS: jag talar lite svenska. Du kan skriva här i svenska, jag skriva/svara <som jag kan
pics etc.
http://palkki.oulu.fi/%7Esamila/bemari/index.htm
pics at the end of the page...sorry for finnish, English version coming someday[/url]
!) . Slowly getting there 
)
